PROJECT A.D.D. (Area Denial Device)
3 posters
Page 1 of 1
PROJECT A.D.D. (Area Denial Device)
this will be the thread for sean's and I mad creation which is the mk46 muahahaha stay tuned
Papa Bear- Posts : 446
Re: PROJECT A.D.D. (Area Denial Device)
So got a parts list now for teh beastzors
G&P ver2 shell, arl, tappet, cylinder, double oring nozzle, hop up chamber
Riot SC 22:1 gears
R hop'd Prommy 6.05 407mm stainless steel barrel
Prommy hard bucking
Prommy POM piston head with sorbo added
HS5 Mnub
SHS 15 tooth piston with teeth removed/aoe corrected
SHS Super shooter stainless steel spring guide with ball bearings
G&P spring (not sure of measurement puts out about 420 fps)
Lonex a1 balanced motor
and shimmed from bevel gear
Critiques? Thoughts
G&P ver2 shell, arl, tappet, cylinder, double oring nozzle, hop up chamber
Riot SC 22:1 gears
R hop'd Prommy 6.05 407mm stainless steel barrel
Prommy hard bucking
Prommy POM piston head with sorbo added
HS5 Mnub
SHS 15 tooth piston with teeth removed/aoe corrected
SHS Super shooter stainless steel spring guide with ball bearings
G&P spring (not sure of measurement puts out about 420 fps)
Lonex a1 balanced motor
and shimmed from bevel gear
Critiques? Thoughts
Papa Bear- Posts : 446
Re: PROJECT A.D.D. (Area Denial Device)
Just take the usual precaution with gearbox cracking with that FPS and version 2 setup.
Re: PROJECT A.D.D. (Area Denial Device)
NGOB wrote:Just take the usual precaution with gearbox cracking with that FPS and version 2 setup.
Already have 420 fps isn't that high sean has put the same g&p shells through a lot more stress than this set up will ever be
Papa Bear- Posts : 446
Re: PROJECT A.D.D. (Area Denial Device)
I would get a modify ARL due to it having a slit on the shaft, makes your life easier especially if you don't have semi.
Also, I've got Viton O-rings, just see me about getting one.
why Prommy? you could cut the cost with a madbull V2.
Be sure to put the sorbo on the cylinder head not the piston head.
Also, I've got Viton O-rings, just see me about getting one.
why Prommy? you could cut the cost with a madbull V2.
Be sure to put the sorbo on the cylinder head not the piston head.
Oden- Posts : 249
Re: PROJECT A.D.D. (Area Denial Device)
Good catch gene i meant cylinder head. With 12 arl catch points its already easy to reset and install. Ill hit you up on orings.
Papa Bear- Posts : 446
Similar topics
» Tentative Invitational Saturday Game for Area Airsofters.
» Project SuperBadass
» Project: Oden E.Y.E.
» Rebuild Project: ICS M16
» Airsoft Trajectory Project
» Project SuperBadass
» Project: Oden E.Y.E.
» Rebuild Project: ICS M16
» Airsoft Trajectory Project
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|