VSR10 Upgrade choices
3 posters
Page 1 of 1
VSR10 Upgrade choices
http://www.evike.com/product_info.php?products_id=37771
vs
http://shop.ehobbyasia.com/tokyo-marui-precision-brass-barrel-and-new-chamber-set-for-vsr-10-1.html
vs
http://redwolfairsoft.com/redwolf/airsoft/Accessories_Rifle_Parts_PDI_hop_up_chamber_ver_2_for_tokyo_marui_VSR_10.htm
Any suggestions/testaments?
vs
http://shop.ehobbyasia.com/tokyo-marui-precision-brass-barrel-and-new-chamber-set-for-vsr-10-1.html
vs
http://redwolfairsoft.com/redwolf/airsoft/Accessories_Rifle_Parts_PDI_hop_up_chamber_ver_2_for_tokyo_marui_VSR_10.htm
Any suggestions/testaments?
thenumber_9- Posts : 52
Re: VSR10 Upgrade choices
Of the 3 I would recommend getting the Tokyo Marui unit. From what I've read while researching parts for my L96 the PDI unit is technically the most advanced, allowing for the most granule of adjustment. However, the trade-off is that it's going to take you ages to find the perfect adjustment setting. This may be OK, but only if you don't intend to really take your rifle apart.
Angel Customs are relatively new to the scene, so I'd hesitate to recommend them. I've been burned by unproven companies before (notably, Hexagon Productions). I've oft found that if you want to do something, do it right.
TL;DR, pick the PDI if you want absolute control over the hop unit. Pick the TM if you want a good unit that easy to use.
...though honestly, i would recommend looking around at other forums. Both Airsoft Retreat and Airsoft Forum have sections dedicated to Sniper Rifles, and given the popularity of the Bar 10 I'm sure there are endless guides. I also think there's a specific Airsoft Sniper forum too.
Angel Customs are relatively new to the scene, so I'd hesitate to recommend them. I've been burned by unproven companies before (notably, Hexagon Productions). I've oft found that if you want to do something, do it right.
TL;DR, pick the PDI if you want absolute control over the hop unit. Pick the TM if you want a good unit that easy to use.
...though honestly, i would recommend looking around at other forums. Both Airsoft Retreat and Airsoft Forum have sections dedicated to Sniper Rifles, and given the popularity of the Bar 10 I'm sure there are endless guides. I also think there's a specific Airsoft Sniper forum too.
Cleaver- Posts : 485
Re: VSR10 Upgrade choices
I have seen said super sniper thread. IDK where it is exactly but i do remember it starting on ASF. I believe it has migrated and been copied over to other forums (I remember seeing a link to it on ASM at one point) so it shouldn be hard to find. I remember it being called the 'holy grail of sniper threads' or something like that. But then again I dont remember it being specific to Bar -10s just snipers in general.
Dragoncaptin- Posts : 202
Re: VSR10 Upgrade choices
That thread actually addressed more durability and consistency over specific parts. Still a good article, I'll find it when I get done here.
Cleaver- Posts : 485
Re: VSR10 Upgrade choices
Here's the aforementioned link: Holy Grail Sniper's Guide
Has to deal more with AEGs, but most of the principles are there.
Has to deal more with AEGs, but most of the principles are there.
Cleaver- Posts : 485
Re: VSR10 Upgrade choices
Thanks for the link! Eliminates my gnawing need to beg for everyone's opinion upgrade-wise. There's a lot to work on without buying anything extra, which puts a smile on my face.
I'm going to spring for the TM chamber and barrel set for the ease of control, as I am still a casual player.
I'm going to spring for the TM chamber and barrel set for the ease of control, as I am still a casual player.
thenumber_9- Posts : 52
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|